(May-2024) Get professional help from our HCL-BF-PRO-10 Dumps PDF
Give You Free Regular Updates on HCL-BF-PRO-10 Exam Questions
NEW QUESTION # 17
What is the purpose of the Four Eyes Approval feature?
- A. It is used to prevent console operators from unilaterally taking actions on the endpoints within their control.
- B. It is used during the creation of BigFix operators to ensure uniformity.
- C. It is used to enforce complex BigFix console operator passwords.
- D. It is used by the BigFix client to authenticate a BigFix operator's deployed actions.
Answer: A
NEW QUESTION # 18
Which is an available field when creating a new property?
- A. CVEID
- B. Create in site
- C. Evaluate Every
- D. Applicability
Answer: C
NEW QUESTION # 19
A BigFix Administrator is designing an environment to support a highly distributed environment with over 1000 remote sites with relays. When planning Top Level Relays which of the following should be considered?
- A. A Top Level Relay can manage up to 80 relays.
- B. A Top Level Relay can manage up to 120 relays.
- C. A Top Level Relay has no limit as to the number of relays they can manage.
- D. A Top Level Relay can manage up to 40 relays.
Answer: B
NEW QUESTION # 20
When an action is performed by the Master Operator, where is the action saved?
- A. The Local Operator Site
- B. The Master Operator Site
- C. The Master Action Site
- D. The same site where the source Fixlet resides
Answer: B
NEW QUESTION # 21
The Site Administrator responsible for managing a BigFix deployment with 50,000 endpoints and no top-level Relays wants to enable Message Level Encryption (MLE). Which of the following should be considered to support this configuration?
- A. The _BESServer_MaxReport_Decryptions setting should be set to an appropriate value on the BigFix Root server to minimize the impact from handling the encrypted reports.
- B. The BigFix Root server requires additional CPU resources appropriate to the number of managed endpoints to process the encrypted reports.
- C. An additional NIC must be added to the BigFix Root server to balance the extra load caused by the encrypted reports.
- D. All Relays must have at least 8GB RAM to support this configuration.
Answer: B
NEW QUESTION # 22
What is the recommended scalability limits to consider when designing a WebUI server on BigFix v10.x?
- A. WebUI supports up to 20 concurrent users on a maximum of 300,000 endpoints.
- B. WebUI has no scalability limits and can support all concurrent users and endpoints as long as additional hardware is added.
- C. WebUI supports up to 36 concurrent users on a maximum of 300,000 endpoints.
- D. WebUI supports up to 100 concurrent users on a maximum of 250,000 endpoints.
Answer: C
NEW QUESTION # 23
When creating a Custom Site, which of the following permission levels can be assigned to operators? (Choose three.)
- A. User
- B. Guest
- C. Administrator
- D. Owner
- E. Writer
- F. Reader
Answer: D,F
NEW QUESTION # 24
An administrator managing BigFix on a Windows Root server is planning an automatic upgrade of the BigFix platform to version 10.0.8.
Which of the following is the best way to update all of the BigFix installers that were originally created by the Installation Generator during the initial BigFix Server install?
- A. Take action on the Fixlel named Fixlel Updated Windows Installation Folders - BigFix version 10 0 8 Nov; Available!
- B. Download each of the installer files for the version 10.0.8 components from the License Download portal webpage and replace the files on the BigFix Server.
- C. The Site Administrator must choose the Update Windows Installation Folders from the Setup tab in the BigFix Administration Tool.
- D. No action is required because the BiqFix installers are automatically updated with the latest version when a new version of the BigFix platform is released.
Answer: A
NEW QUESTION # 25
The locked status of any BigFix Client in the Console can be changed. What is one reason that a computer should be locked?
- A. When the computer needs to be removed from the BigFix console
- B. When changes or updates need to be excluded from the computer
- C. When a comment needs to be attached to the computer
- D. When the computer needs to be added to a computer group
Answer: B
NEW QUESTION # 26
A Non-Master operator wants to create a Retrieved Property that is applicable to the computers that they are allowed to manage. How can they accomplish this task?
- A. Open the Manage Properties window from the Tools menu and click the Add New button.
- B. Select the desired computers from the Computers list area in the Console, then right-click and select Add Property from the context menu.
- C. Right-click on an existing Automatic Computer group that they have created and choose Add Property from the context menu.
- D. Create an Analysis and then click the Add Property button from the Properties tab of the new Analysis.
Answer: D
NEW QUESTION # 27
A request has been made by management to create a property so that managed endpoints can be associated with specific patching groups based on the host name. How is a new retrieved property created in BigFix?
- A. From the WeblH select Devices select the Manage Computer Properties button then click Add New and enter the property name and valid Relevance expression
- B. From the BigFix Console, select Computers, choose the target computer(s) from the list, then right-click and select Edit Computer Settings from the context menu.
- C. This property is created by a Master Operator in an Analysis and stored in the BES Support site.
- D. From the .BigFix Console, select Manage Properties from the Tools menu, click Add New, then enter a name for the property and valid Relevance expression.
Answer: D
NEW QUESTION # 28
A BigFix Administrator will be performing an upgrade in a Distributed Server Architecture (DSA) environment.
Which of the following steps should be taken during this upgrade process?
- A. Run the BiqFix Server upgrade on the secondary servers first, then take action on the DSA Upgrade Fixlet.
- B. Run the BigFix Server upgrade on the primary and secondary servers at the same time.
- C. Run the BigFix Server upgrade on the primary server first, then upgrade the secondary servers.
- D. Run the BigFix Server upgrade on the secondary servers first, then upgrade primary server.
Answer: C
NEW QUESTION # 29
Several BigFix clients are having an issue with receiving new actions. These clients sometimes show as active in the Console appearing in black with a recent Last Report time. After 45 minutes these same clients appear offline. Sending a Force Refresh causes them to appear active again, but after another 45 minutes, they show as inactive once more.
What Task can be run to collect information about the Client Evaluation Cycle to help determine what might be causing this issue?
- A. 353 TROUBLESHOOTING: Run BES Client Diagnostics
- B. 1102 TROUBLESHOOTINGRun BigFix Server Diagnostic
- C. 361 TROUBLESHOOTING: Enable BES Client Usage Profiler
- D. 545 TROUBLESHOOTING: Upload BES Relay Logs
Answer: C
NEW QUESTION # 30
A Master Operator logs into the WebUI to review all actions taken in their BigFix environment. Which page will provide a list of all actions?
- A. Fixlets and Tasks
- B. Reports
- C. Activities
- D. Deployments
Answer: D
NEW QUESTION # 31
The Big Fix Diagnostics Tool performs a complete test on the server components. When can this tool be run?
- A. When a BigFix Support Engineer provides access to the tool and requests that you run it.
- B. Any time that you want to verity the health of the BigFix Root server.
- C. Only during the initial installation of the Root Server.
- D. Any time by taking action on the Troubleshoot: Execute Server Diagnostic task located in the BES Support site.
Answer: B
NEW QUESTION # 32
An administrator needs to reconfigure a proxy server on a Windows BigFix Root server. How does this get accomplished?
- A. By installing the Proxy Bypass plugin on the Root Server.
- B. By running the command BESAdmin.exe /setproxy from the BES Server folder.
C By taking action on Task TROUBLESHOOTING Configure Proxy - C. By updating a Client Setting named BESCIient Comm Proxy.
Answer: B
NEW QUESTION # 33
How is the Site Administrator key generated?
- A. It is generated during installation.
- B. It is generated at the command line using openssl.
- C. It is generated through the Bigfix License Portal.
- D. It is generated by BigFix Support and attached to your license.
Answer: A
NEW QUESTION # 34
What is the default port used for BigFix Web Reports to connect?
- A. Port 443
- B. Port 80
- C. Port 8083
- D. Port 52311
Answer: C
NEW QUESTION # 35
Which of the following command polling interval should be avoided to prevent performance issues?
- A. Less than 2700 seconds
- B. Less than 1800 seconds
- C. Less than 900 seconds
- D. Less than 1500 seconds
Answer: C
NEW QUESTION # 36
Which of the following must be performed by the Site Administrator?
- A. Import custom reports in Web Reports
- B. Create new analyses in an external site.
- C. Take action on patch Baselines
- D. Set and modify global system options.
Answer: D
NEW QUESTION # 37
A single BigFix Enterprise Server can support up to how many endpoints?
- A. 0
- B. 200,000
- C. 300,000
- D. 5,000
Answer: C
NEW QUESTION # 38
How can the Site Administrator private key password be changed?
- A. Change the database login account password.
- B. Use the BigFix Administration Tool to change the Site Administrator private key password.
- C. In the BigFix Console, go to Preferences from the Tools menu and select Change Site Administrator Private Key Password.
- D. Go to the Operator site in the BigFix Console, select the Site Administrator account, right-click and choose Reset Password.
Answer: B
NEW QUESTION # 39
During a BigFix platform upgrade, which of the following version rules must be respected for the various components?
- A. server version >= relay version >= client version
- B. server version = relay version = client version
- C. server version >= relay version <= client version
- D. server version < relay version >= client version
Answer: A
NEW QUESTION # 40
The license.pvk file is used to authenticate which Big Fix user?
- A. All BigFix LDAP operators
- B. The BigFix Site Administrator
- C. All BigFix local operators
- D. All BigFix Master Operators
Answer: B
NEW QUESTION # 41
......
Achieve the HCL-BF-PRO-10 Exam Best Results with Help from HCLSoftware Certified Experts: https://pdftorrent.dumpexams.com/HCL-BF-PRO-10-vce-torrent.html