Pass HP HPE0-J68 Exam Info and Free Practice Test
New 2023 Latest Questions HPE0-J68 Dumps - Use Updated HP Exam
NEW QUESTION # 99
Match the type of storage found in today's market to the HPE storage solution optimized for that capacity?
- A. Nimble - Block
- B. MSA - Block
- C. StoreVirtual - Block
- D. StoreEasy - File
- E. HPE 3PAR StoreServ - Block
- F. Scalability - Object
Answer: E
NEW QUESTION # 100
A customer is planning to connect a new HPE 3PAR StoreServ system to its existing Synergy based composable infrastructure via direct-attach.
Which tool would be used to manage the storage?
- A. HPE SAN Network Advisor
- B. HPE Synergy Image Streamer
- C. HPE InfoSight for 3PAR
- D. HPE Synergy Composer
Answer: D
NEW QUESTION # 101
Exhibit:
Which fabric design is shown?
- A. single fabric
- B. core-edge
- C. cascaded
- D. meshed
Answer: D
NEW QUESTION # 102
Refer to the exhibit.
You create two snapshots of a thin provisioned base volume in an HPE Primer a. One snapshot is read only and the other is read-write. A write occurs at the location shown in in the diagram.
Place the actions on the left into the order they are taken on the right.
Answer:
Explanation:
1 - Redirect the snapshots
2 - Copy block to snapshot CPG
3 - Update the block with new data
NEW QUESTION # 103
A customer has an HPE 3PAR StoreServ 8200 with eight 3.84 TB SSD's configured with RAID5 7+1. They plan to add four more 3.84 TB SSD's.
What needs to be changed on the configuration once the new SSD's are installed?
- A. Reconfigure the cpg setsize as RAID6 6+2 and wait for tunesys to complete.
- B. Change the cpg setsize to RAID5 5+1 and run tunesys.
- C. Adjust the cpg growth value to match amount of SSD's.
- D. Change the availability level from cage to magazine.
Answer: B
NEW QUESTION # 104
You are presenting a Nimble solution based on CS3000 hardware to a customer. Which support advantage will be provided with this solution(select two)
- A. Customers only have to deploy a service processor for automating support tasks.
- B. Customers always interact with a 3rd level support engineer ,when needed
- C. Infosight performs firmware and software updates without additional administrative support.
- D. Infosight handles the work of 1st and 2nd level support specialist Infosight offers predictive analytics and integration into HPE support center using insight Online.
Answer: B,D
NEW QUESTION # 105
Refer to the exhibit.
You are configuring a new HPE array and verifying properties of a set of volumes.
Which RAID level is used on the VMwareDatastores-GF volume?
- A. RAID 5
- B. RAID 6
- C. RAID 0
- D. Triple Parity+
Answer: A
NEW QUESTION # 106
An HPE 3PAR StoreServ customer with FC, SSD and NL, drives is facing extreme latency during peak business hours with an OLTP application. They have enabled tiering using all drive types.
What could be used to resolve the issue?
- A. Dynamic Optimization using tier 2
- B. Dynamic Optimization between tier 0 and tier 1
- C. Adaptive Optimization using tier 1
- D. Dynamic Optimization using tier 1
Answer: B
Explanation:
During a peak period when performance is critical, the VV can be optimized by moving to faster disk and the RAID level.
NEW QUESTION # 107
You are proposing a new Nimble solution to a customer that recently experienced data loss in their existing storage array.
Which features of the Nimble array should you emphasize to your customer to address their concerns? (Choose two.)
- A. encryption
- B. quick RAID rebuild
- C. compression
- D. triple party
- E. deduplication
Answer: C,E
NEW QUESTION # 108
A customer need to implement a new SAN fabric for their growing environment .The new SAN should provide a high performance and port-efficient network with many-to-many connectivity .Because of changing requirement and the possible acquisition of another company in the near future. The customer cannot predit the I/O traffic pattern within the SAN .The customer also concerned about availability. Which type of SAN topology should you recommend?
- A. Meshed fabric
- B. Core-edge fabric
- C. Cascaded fabric
- D. Single switch fabric
Answer: A
NEW QUESTION # 109
Which SAN topology offers the highest centralized data access performance?
- A. Meshed
- B. Ring
- C. Cascaded
- D. Core-Edge
Answer: D
NEW QUESTION # 110
During Technology workshop ,the customer asks about different between converged and fibre channel switches. What would be a benefits of using flex fabric switches in a fibre channel storage environment?
- A. In-flight compression and encryption provides efficient link utilization and security
- B. Support for combining multiple physical switches in to one virtual switch with a single IP address
- C. Support for six Ethernet and two fibre channel ,or six Ethernet and two ISCSI or eight Ethernet adapters per server.
- D. Zones can be configured for QoS with high ,medium, and low priorities within a fabric on a zone by zone basic
Answer: B
NEW QUESTION # 111
Match the HPE converged Strategy principle with its function
- A. Storage virtualization:- Deliver simplified management ,higher utilization ,efficient, and agility by separating the logical and physical resource.
- B. Thin provisioning:-Reduce TCO ,Opex and CPEx by using virtualization technology to make storage resources more efficient.
- C. Federated Storage:- Move data between storage systems in peer-to-peer relationship simply, dynamically and nondestructively
- D. Storage tiering:-Use combination of I/O accelerator to place data to meet price, performance, and latency requirements .
- E. Deduplication:-Reduce allocated capacity by eliminating data redundancy
Answer: A
NEW QUESTION # 112
What are two advantages of HPE Recovery Manager Central? (Select two.)
- A. Manual data provisioning and policy-based copy protection
- B. Less expensive than traditional backup
- C. Includes Peer Copy asynchronous replication
- D. Integration capabilities utilizing HTML
- E. Enables automatic transparent failover
Answer: B,C
NEW QUESTION # 113
Refer to the exhibit:
Which type of data format do you expect in the red rectangle?
- A. 20110002AC00736E235.524
- B. iqn.2015-02.com.hpe:oneview-vcgeDav000
- C. 172.16.31.11/24
- D. 94:b4:0f:cd:34:8a
Answer: A
NEW QUESTION # 114
A customer has an existing configuration consisting of first class and nearline SAS drive in an 8000 SFF enclosure. They add two SFF 8000enclosure that are fully populated with nearline drives to an existing HPE 3Par storeserv 8400 array. What should the customer do to optimize their storage configuration?
- A. Run tunesys and on the array (275)
- B. Create new CPG for the newly installed drivers
- C. Defrag the CPG and run align drive on their system
- D. Enable space reclamation
Answer: A
NEW QUESTION # 115
A customer has the following requirements for a storage solution:
VMware environment
20 TB of standard business data
400 TB of video archive files
10 GB iSCSI connectivity
They are most concerned with the cost of the solution.
Which HPE storage solution offers the lowest cost while meeting the customer requirements?
- A. HPE Primera
- B. HPE Nimble
- C. HPE MSA
- D. HPE SimpliVity
Answer: A
NEW QUESTION # 116
During which event will HPE 3par Storeserv persistent port feature provide transparent and uninterrupted failover (Select two)
- A. Node maintenance or failure
- B. B-series SAN switch upgrades
- C. Loss of persistent cache
- D. Firmware upgrade
- E. Loss of full-mesh cluster interconnect
Answer: A,D
NEW QUESTION # 117
A customer recently acquired another company and found that the existing infrastructure was outdated and costly to maintain. They need to put a complete infrastructure solution in place that minimizes the footprint in the data center as quickly and possible. Which solution you recommend?
- A. Bladesystem 7000
- B. Synergy 12000
- C. Converged systems
- D. Simplicity 380
Answer: D
NEW QUESTION # 118
Which software feature should an HPE 3PAR Storeserv 8000 customer use to optimize data protection and recovery, Including rapid online recovery for his VMware environment?(select two)
- A. HPE 3PAR Security software suite
- B. HPE 3PAR Virtual Copy software
- C. HPE 3PAR Remote copy software
- D. HPE StoreOnce recovery manager central for VMware
- E. HPE 3PAR File persona Software suite
Answer: B,D
NEW QUESTION # 119
Which HPE 3Par feature improves CPU utilization ,reduces latency and improve IOPS ?
- A. Zero Detect
- B. Express Writes
- C. Persistent Cache
- D. Express Indexing
Answer: B
NEW QUESTION # 120
Which storage protocol is supported by virtual connect Flex-10?
- A. FC
- B. FCIP
- C. ISCSI
- D. FCoE
Answer: C
NEW QUESTION # 121
A customer successfully implemented an HPE Primera solution.
Which tool can be used to verify performance counters, such as IOPS, match customer requirements?
- A. Recovery Manager Central
- B. OneView
- C. Primera on-node management GUI
- D. NinjaCrawler
Answer: C
NEW QUESTION # 122
Which HPE 3PAR StoreServ feature allows a host to continue I/O uninterrupted during a firmware upgrade?
- A. Peer Persistence
- B. Persistent Ports
- C. Persistent Cache
- D. Persistent Memory
Answer: B
NEW QUESTION # 123
......
Latest HPE0-J68 Exam Dumps HP Exam: https://pdftorrent.dumpexams.com/HPE0-J68-vce-torrent.html